Common sense of flooring floor quality problems an

2022-07-22
  • Detail

Solid wood flooring has many problems in modern life. Distortion, large gaps between floors, large height differences between floors, corrugated floors... What are the reasons for this

solid wood flooring has many problems in modern life. Distortion, large gap between floors, large height difference between floors, corrugated floor &hellip& hellip; What are the reasons

solid wood flooring block is a traditional product developed earlier in China's flooring industry. Because this product is directly machined from natural wood, it has the characteristics of natural beauty, warm in winter and cool in summer, non-toxic, good foot feel, noble and so on. It is deeply favored by the majority of consumers, and has always been one of the leading products in the wood flooring industry. Especially in recent years, with the increasing improvement of people's living standards and the vigorous development of interior decoration industry, the production and sales of solid wood flooring are also gradually expanding. The tree species used for solid wood flooring have also developed from oak, birch, Fraxinus mandshurica and other tree species to dozens of tree species mainly imported, which greatly meet the needs of society and people's life. However, there are also many quality problems in the use of solid wood flooring, which are specifically reflected in the following aspects:

Natural Forest solid wood flooring Kanghui solid wood flooring

1, distortion and deformation

2. The gap between floors is too large

3. The gap between floors is too large

4. The height difference between floors is too large

5, the floor appears corrugated

6. Cracks appear on the floor

7. Peeling, cracking and wrinkling of paint film

8. Floor discoloration

the reasons are mainly caused by three aspects: pavement quality, floor quality and improper use. The specific reasons are as follows:

the main reasons for the distortion of the floor are:

1. The wood properties of the floor are not suitable

2. Improper processing technology and materials, uneven control of floor moisture content, or floor moisture content is not suitable for the environmental requirements of the place of use

the reasons for the excessive gap between the floors are:

1, the moisture content of the floor is too large

2. The indoor environment is too dry

3. The floor laying quality is not high, causing the floor to move

the reasons for floor arching are:

1. The reserved gap between the floor and the wall foundation is not enough when paving

2. There is no bridge treatment between rooms or the gap reserved during bridge treatment is not enough

3. The moisture content of the floor is too low when laying

4. The floor of the room is soaked in water due to water leakage

5. The ground is wet or the keel wood is wet

the reasons for the excessive height difference between floors are:

1. The ground is uneven

2. Uneven keel laying

3. Large deviation of floor thickness

4, the floor is deformed

5. The processing of floor mortise is not matched

the reasons for the corrugated floor are:

1. The cement floor is uneven when the floor is laid, and the moisture content of the keel is too large

2. The indoor environment is dry;. The moisture content of the floor is too high

3. The indoor environmental humidity is too high, and the floor moisture content is low

the reasons for cracks in the floor are:

1. Wood properties are not suitable for making wood floors

2. The moisture content of wood floor is high, and the indoor environment is dry and low humidity

the reasons for the peeling, cracking and wrinkling of the paint film are:

1. The paint performance is not suitable for the floor material, resulting in the adhesion between the paint film and wood can not meet the use requirements, resulting in peeling

2. The toughness of the paint film can not meet the changes of natural moisture expansion and drying shrinkage of wood, resulting in cracks and wrinkles in the paint film

3. Peeling of finish coat caused by poor adhesion between finish coat and primer

link: several key points of floor selection in children's room

广州癫痫医院

郑州乳腺医院

威海男科医院

Copyright © 2011 JIN SHI